Maintenance method during screw removal

1. The quick-release screw that is used up needs to be reclaimed in a timely manner, and it must be stored in a storage bank. If piled up in the open air, make sure that the site is level and well drained. Below, you need to set up a support pad, cover it with a cloth, and store the accessories on the inside.

2. All bent and deformed rods must be straightened immediately. Damaged components must be repaired immediately before they can be stored in the warehouse. Otherwise, they must be replaced.

3. Regularly remove rust and prevent rust on quick release screw rods and accessories. In areas with high humidity, anti-rust paint should be applied once a year. In areas with moderate humidity, it is necessary to brush once every two years. The fasteners need to be oiled and the bolts need to be galvanized to prevent rust. If there is no condition for galvanizing, it needs to be washed with kerosene after each use, and finally coated with oil to prevent rust.

4. The fasteners, nuts, pads, latches and other small parts used in the quick-release screw of the building scaffold are easily lost. The excess parts should be collected and stored in time when it is set up. Still messing around.